Do you have any questions?

FONTANELLA SAT

Art. No. 5937

The FONTANELLA subwoofer satellite system is both visually and accoustically a completely new experience. The drivers in the satellitesare arranged to project the sound upwards. Two specially shaped cones reflect the sound according to specific patterns to ensure that the sound is distributed horizontally and uniformly in all directions.

The mid-bass unit is the AL 130 M - 8 Ohm, and the tweeter range is covered by the DT 94 - 8 Ohm.

This diffused sound distribution means that the impressive spatial effect is virtually uniform all round the room. Virtual sound sources, for example the voices or instruments that appear between the speakers, can be clearly and precisely located. The depth of colour of the sound remains the same at any seating position in the whole room. Ideally, the satellitesshould be positioned 0.5 m to 1 m away from a wall and on a base or stand. The cones should then be at ear level or slightly below.

The passive subwoofer cabinet has been designed to match the satellitesand is fitted with the GF 200 - 2 x 4 Ohm double voice-coil woofer; resulting in powerful, highly dynamic bass reproduction from this high-end driver.

The FONTANELLA system provides a high level of listening pleasure as a hifi stereo system but is also extremely well suited to use as the rear effect channel in home-video systems. In such cases, the subwoofer is not required and the two satellites are used alone.

Technical Data
Component parts list
Additional Content
Rated power 60 W
Maximum power 90 W
Nominal impedance Z 8 Ohm
Übertragungsbereich (-10 dB) 120 - 20000 Hz
Mittlerer Schalldruckpegel 80 dB (1 W/1 m)
Trennfrequenz 2000 Hz
Gehäuseprinzip geschlossen / closed
Net volume 6.5 l
Außenmaß Höhe 360 mm
Außenmaß Breite 239 mm
Außenmaß Tiefe 239 mm

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter
DT 94 - 8 Ohm
1 pc.
Bass-midrange driver
AL 130 M - 8 Ohm
1 pc.
Crossover
Crossover Fontana/Fontanella Sat
1 pc.
Terminal
ST 77
1 pc.
Damping material
Polyester wool
1/4 bag
Wood screws
3.5 x 19 mm
7 pcs.
Mounting set
Terminal neutral
2 pcs.
Terminal red
1 pc.
Terminal black
1 pc.
Spacing piece (20 mm, wrench size 7 mm, inside thread M4)
4 pcs.
Cable
2 x 15 mm²
0.75 m
Cone set Fontana
beech
1 set
Holding device
brass
4 pcs.

Accessories

Speaker stands
SPIKES
4 pcs.

Do you have any questions?

Contact us